Tenba CC17 vs Tripak CCT46: Which Transport Case Fits?
By The Flash Centre | Published: 2026-11-03
Category: 購入ガイド
Compare the Tenba Transport Car Case CC17 and Tripak CCT46 by size, shape and intended load. See which fits your camera kit or lighting stands for car transport.
Quick answer
Choose the Tenba Transport Car Case CC17 if you need a compact, square-ish case for a medium-duty camera or lighting kit; choose the Tripak CCT46 if your priority is carrying tripods or light stands. The CC17's 460 x 460 x 250 mm external size suits boxy gear, while the Tripak is purpose-built for long, thin items.
Shape matters more than raw size
The CC17 is a 460 x 460 x 250 mm external case, so its footprint is roughly square. That shape works well for camera bodies, lenses, brackets and small light heads that pack into a block. It is less efficient for long items because the diagonal is the only way to fit them.
The Tripak CCT46 is described as protection for tripods and light stands. Long, thin loads need a case whose length matches the item, not a cube that forces an awkward angle. If you regularly carry stands, the Tripak's form is the deciding factor.
Where these cases are not the right choice
Both are Car Cases, intended for serious transport protection when you do not need to ship or check your equipment. They are lightweight and economical rather than hard-shell shipping cases. If your gear flies as checked baggage or travels by freight, look for a case rated for that instead of assuming these will survive it.
The catalog does not list internal dimensions, weight limits or divider layouts for either model. That absence is a real limitation: measure your largest item and compare it with the external size, then confirm internal fit with the retailer before buying.
Decision rules for choosing between the CC17 and Tripak CCT46
- Rule 1: Match the case to your longest item: Measure your longest piece of gear. If it is a tripod or light stand, choose the Tripak CCT46. If your longest item is under roughly 460 mm and boxy, the CC17 is the better shape. Write down the measurement before comparing any case.
- Rule 2: Count how you will load it: The CC17's square footprint rewards gear that stacks in blocks, such as camera bodies, lenses and small light heads. The Tripak rewards a single long load. If you carry a mix, decide which item is least replaceable and protect that first.
- Rule 3: Confirm the transport mode: Both are Car Cases for medium-duty transport when you are not shipping or checking the equipment. If the case will be checked on a flight or sent by courier, stop and choose a shipping-rated case instead. Car transport only: do not assume airline-check protection.
- Rule 4: Verify internal fit before ordering: Internal dimensions and divider layouts are not supplied for either model. Ask the retailer to confirm internal measurements against your measured gear, especially for the CC17's 250 mm depth. A case that fits externally can still fail internally.
Product facts
- Tenba Transport Car Case Tripak CCT46: Tripak cases are designed to protect tripods and light stands. If your load is long and thin, this is the shape to start with rather than forcing stands into a square case.
Tenba Transport Car Case Tripak CCT46 - Tenba Transport Car Case CC17: External dimensions are 460 x 460 x 250 mm. A square footprint suits boxy camera or lighting kits, but check that your longest item fits within 460 mm before committing.
Tenba Transport Car Case CC17
Who each case suits
Best for
- Photographers carrying a boxy camera or small lighting kit by car to weddings and location shoots
- Owners of tripods or light stands who need a long, purpose-shaped transport case
Not for
- Anyone checking gear as airline baggage or shipping it by freight
- Buyers who need confirmed internal dimensions or divider layouts before purchase
