Back to Blog
Comparisons 2026-11-16 The Flash Centre 0 views

Elinchrom D-Lite RX ONE Kit vs Westcott FJ400-SE Strobes

Elinchrom D-Lite RX ONE Kit vs Westcott FJ400-SE Strobes

Two studio flash kits with very different power, mounting and camera support. Compare the Elinchrom D-Lite RX ONE Baby Portrait Kit and Westcott FJ400-SE kit before you buy.

Two studio flash kits, two different jobs

The Elinchrom D-Lite RX ONE Baby Portrait Kit and the Westcott FJ400-SE 2-Light Studio Strobe Kit look similar on a shelf: both are boxed studio flash kits with softboxes and a trigger. In use they are not interchangeable. One is a low-power single-light kit built around a 135cm octabox; the other is a two-light 400Ws kit with a Sony-specific transmitter and Bowens S-Type modifier mount.

This comparison sticks to what the supplied product records confirm. Where a detail is not in those records, treat it as an open question to check with the store rather than a reason to assume the worst about either kit.

Power, recycling and flash duration side by side

  • Power range: Elinchrom D-Lite RX ONE: 6Ws to 100Ws. Westcott FJ400-SE: 12.5Ws to 400Ws, adjustable in 0.1 or 1.0 stop increments.
  • Recycle time: Westcott FJ400-SE: 0.5 to 1.0 second. The Elinchrom record does not state a recycle time.
  • Flash duration: Elinchrom D-Lite RX ONE: 1/2200 t.05, which the record links to freezing motion for pets. The Westcott record does not state a flash duration.
  • Colour consistency: Westcott FJ400-SE: 5500K daylight-balanced with ±200K tolerance. Elinchrom describes accurate exposure and colour consistency without giving a Kelvin figure in the supplied record.
  • Modelling light: Westcott FJ400-SE: built-in 15W daylight LED. Elinchrom D-Lite RX ONE: proportionally adjustable modelling lamp for previewing.

What 100Ws versus 400Ws means in a small room

The Elinchrom kit is explicitly aimed at small spaces and small subjects such as babies, families, portraits and pets. Its 6Ws to 100Ws range and short 1/2200 t.05 flash duration suit wide-aperture, soft-light portraits where you want to open up and still freeze small movement. The record notes the head offers up to twice the power of a standard speed light.

The Westcott FJ400-SE strobes deliver 400 watt-seconds each, with a six-stop range down to 12.5Ws. That headroom helps when you diffuse heavily, light a larger group, or need faster recycling during a busy session. If your work is almost entirely newborns and tight portraits in a small room, the Elinchrom kit's lower minimum power and short duration are the more relevant numbers; if you expect to grow into products, groups or larger modifiers, the Westcott kit leaves more room.

Elinchrom D-Lite RX ONE kit: what the record confirms

  • Elinchrom D-Lite RX ONE Baby Portrait Kit: Includes 1x D-Lite RX One head, 1x Rotalux Octabox 135cm softbox, 1x Skyport Plus Transmitter, 1x Cliplock Stand and 1x Rotalux Speedring for Elinchrom V2. The kit is a complete single-light setup with stand and trigger, so you can start shooting without buying a separate stand or radio trigger.
    Elinchrom D-Lite RX ONE Baby Portrait Kit
    Elinchrom D-Lite RX ONE Baby Portrait Kit
  • Elinchrom D-Lite RX ONE Baby Portrait Kit: Power range 6Ws to 100Ws with 1/2200 t.05 flash duration. Low minimum power and short duration are the features that make this kit suited to soft, wide-aperture baby and pet portraits.
  • Elinchrom D-Lite RX ONE Baby Portrait Kit: Built-in Skyport radio receiver for triggering and power control with the Skyport Transmitter. Wireless power control from the included transmitter keeps you at the camera rather than walking to the head.
  • Elinchrom D-Lite RX ONE Baby Portrait Kit: Multi-voltage auto-detection: 90-270 V for global use. Useful if you travel or shoot in venues with different mains voltages.
  • Elinchrom D-Lite RX ONE Baby Portrait Kit: Compatible with Elinchrom light shapers (excluding Quadra range); centred 7mm umbrella shaft. Modifier choice is limited to the Elinchrom system rather than the wider Bowens S-Type market.

Westcott FJ400-SE 2-Light kit: what the record confirms

Mount, trigger and camera system decide more than watt-seconds

  • Modifier mount: Westcott uses Bowens S-Type, a widely supported mount. Elinchrom uses its own light shaper system, excluding Quadra range. If you already own Bowens-fit softboxes, grids or beauty dishes, the Westcott kit lets you reuse them; with the Elinchrom kit, plan around Elinchrom-fit modifiers.
  • Trigger compatibility: The Westcott kit includes the FJ-X3 S transmitter made for Sony cameras. The Elinchrom kit includes a Skyport Plus Transmitter and a built-in Skyport receiver. The supplied records do not list which camera brands the Skyport Plus Transmitter supports, so check that against your camera before ordering.
  • Number of lights: Two FJ400-SE heads allow key and fill or a background light. The Elinchrom kit is a single head, so a second light would be a separate purchase if you need one.
  • Power and portability: Both are AC-powered studio heads. The Elinchrom record notes multi-voltage 90-270 V auto-detection; the Westcott record does not state a voltage range, so confirm it for travel or unusual mains supplies.

Which kit fits your studio?

Choose the Elinchrom D-Lite RX ONE Baby Portrait Kit if your work is mostly newborns, babies, families and pets in a small space, you want one soft light with a large 135cm octabox, and you value the low 6Ws minimum and 1/2200 t.05 flash duration. It is a single-light kit, so you are committing to one light or planning a second head later.

Choose the Westcott FJ400-SE 2-Light Studio Strobe Kit if you shoot Sony and want the dedicated FJ-X3 S transmitter, need two 400Ws heads with fast 0.5 to 1.0 second recycling, or want the Bowens S-Type mount for a wide range of modifiers. It is the more expandable system, but it is also the higher-output, higher-cost option in this comparison.

Neither record confirms TTL or High-Speed Sync behaviour for the Elinchrom kit, and the Westcott record does not state a flash duration or a voltage range. If those points matter to your work, ask before you buy rather than assuming.

Related Articles

Customer Service
Home
Products
Cart
Profile